FEATURES AND CONSTRUCTION OF INDUCTION FURNACE

An electric induction furnace requires an electric coil to create the charge. This heating coil is in the end supplanted.

• The pot in which the metal is put is made of more grounded materials that can stand up to the required heat, and the electric coil itself cooled by a water framework with the goal that it does not overheat or liquefy.

• The induction furnace can run in size, from a little furnace utilized for extremely exact amalgams just around a kilogram in weight to a much bigger furnaces made to mass create clean metal for a wide range of uses.

• The benefit of the induction furnace is a perfect, vitality effective and well controllable liquefying procedure contrasted with most different method for metal dissolving.

•  foundries utilize this sort of furnace and now additionally more iron foundries are supplanting domes with induction furnaces to liquefy cast iron, as the previous transmit loads of dust and different poisons.

•  Induction furnace limits range from under one kilogram to one hundred tons limit, and are utilized to dissolve iron and steel, copper, aluminum, and valuable metals.

• The one noteworthy disadvantage to induction furnace use in a foundry is the absence of refining limit; charge materials must be spotless of oxidation items and of a known synthesis, and some alloying components may be lost because of oxidation (and must bere-added to the melt )

CONSTRUCTION OF INDUCTION FURNACE : 

There are a wide range of outlines for the electric induction furnace, yet they all inside around a fundamental thought.

CONSTRUCTION OF INDUCTION FURNACE

• The electrical coil is set around or within the pot, which holds the metal to be softened. Regularly this cauldron is isolated into two distinct parts. The lower segment holds the melt in its purest structure, the metal as the makers want it, while the higher segment is utilized to evacuate the slag, or the contaminants that ascent to the surface of the melt.
• Cauldrons might likewise be outfitted with solid tops to decrease the amount of air has admittance tothe liquefying metal until it is poured out, making a purer melt.

Stead Fast Engineers Pvt Ltd is an engineering company engaged in designing and manufacturing of Induction Melting furnaces, Induction Heater and Lining Machines for Foundries Steel Plants and Forging Plants.

We practice Total Quality Management. Products pass through stringent quality checks at each stage of manufacturing. The company has ISO 9001:2008 certification. All products also have CE certification. http://www.steadfastengg.com/